Categories

CompactStrip 9200 RX

Archive
CompactStrip 9200 RX
Automatic Cut & Strip Machine for Micro Coaxial and Coaxial Cable The CompactStrip 9200 RX programmable cut & strip machine processes microcoaxial and coaxial cables. It can strip both ends of cables as short as 18 mm (0.70”) in overall length. With its universal rotary stripping head and V-type cutting blades, the CompactStrip 9200 RX is able to process the entire range of cable types and diameters without any blade changes. Once the values for a particular cable and job are stored in memory, they can be retrieved in seconds.

Function

After pressing the start key, the cable being processed is centered and clamped by the force-controlled centering system. The blades then execute the rotary incisions according to the programmed diameter and length position values. As soon as all the required incisions are completed, the cable is transported to the cutter head where it is cut and the various layers are stripped from both cable ends. After the cable processing is completed, the cable is transported to the machine exit and ejected by the right hand transport belts.

Processing Parameters / Cable Stripping Samples

  • Rotary speed
  • Incision diameter
  • Incision feed rate
  • Blade incision pause
  • Blade way back
  • Stripping length
  • Pull off length
  • Pull off speed
  • Discard function / Trimming function
  • Multiple step / Multiple strip / Processing order
Cable Stripping Samples

Technical Specifications

Attribute Value
Max. Cable Outer Diameter 3.6 mm (0.14”)

Min. Conductor Diameter

0.15 mm (0.005”) / AWG 36

Diameter Increments

0.01 mm (0.001”)

Cable Length Minimum

18 mm (0.70”) + stripping length / Maximum 1000 m (39,370”)

Max. Stripping Length

Left side 6 mm (0.236”) * Right side 999.9 mm (39.37”)
(* with special guide 8 mm)

Max. Pull Off Length

Left side 6 mm (0.236”) * Right side 8 mm (0.315”) **
(* with special guide 8 mm) (** without guide, depending on cable, 11 mm)

Length Increments

0.05 mm (0.002”)

Transport Speed

Up to 1 m/s

Production Rate

Approx. 900 cables / hour with a 3 step strip on both ends (depending on cable type
and programming)

Interfaces

Wire markers, prefeeders, wire stackers, cable coilers, robotic interface, RS 232,
CAN, parallel (Centronics) printer port

Air Pressure

0.5 – 0.7 Mpa (5 – 7 bar)

Power Supply

95-132 VAC / 190-264 VAC; 47-64 Hz; 600 VA

Noise Level

< 75 db (A)

Dimensions (L x W x H)

660 x 580 x 400 mm (25.9 x 22.8 x 15.7”)

Weight

Ca. 65 kg

CE-Conformity

The CompactStrip 9200 RX complies fully with all CE and EMC equipment guidelines
relative to mechanical and electrical safety and electromagnetic compatibility.

Important Note

Schleuniger recommends that wire samples be submitted in cases where there is
doubt as to the processing capabilities of a particular machine.

New products