CompactStrip 9200
Automatic Cut & Strip Machine The CompactStrip 9200 is designed to automatically cut and strip short, thin wires with short stripping lengths. The machine operates as an integral part of a production line and is compatible with a wide range of accessories.
Function
The CompactStrip 9200 is controlled by state-of-the-art electronics. It can be programmed either using the machine's operator interface panel or externally via a PC running Schleuniger Cayman Wire Processing software. The wide range of programmable processing parameters, combined with the patented indexing cutter head, ensures that the highest levels of performance and flexibility are met.
Features
- Processing of very short wires (without moving the insulation on the conductor)
- Cutter head can be equipped with up to 3 blade pairs such as V – Blades, Radius V – Blades or Die Blades
- Highest quality length accuracy and repeatability due to belt feed and the high resolution transport system
- Wide range of programmable processing parameters
- User friendly interface based on a field proven design
- Extensive range of available accessories enables building of a fully-integrated processing line with prefeeders, cable marking systems and post processing equipment
Technical Specifications
| Attribute | Value |
| Max. Cable Outer Diameter | 3.5 mm (0.14”) |
| Min. Conductor Diameter | 0.2 mm (0.008”) / AWG 32 |
| Diameter Increments | 0.01 mm (0.001”) |
| Cable Length (Normal Mode)
Cable Length (Short Mode) | Minimum 18 mm (0.70”) + stripping length / Maximum 1000 m (39,370”)
Minimum 1 mm (0.04”) + stripping length |
| Max. Stripping Length | Left side 6 mm (0.236”) * Right side 999.9 mm (39.37”)
(* with special guide 8 mm) |
| Max. Pull Off Length | Left side 6 mm (0.236”) * Right side 8 mm (0.315”) **
(* with special guide 8 mm) (** without guide, depending on cable, 11 mm) |
| Length Increments | 0.05 mm (0.002”) |
| Transport Speed | Up to 1 m/s |
| Interfaces | Wire markers, prefeeders, wire stackers, cable coilers, robotic interface, RS 232, CAN,
parallel (Centronics) printer port |
| Air Pressure | 5 – 7 bar (75 – 105 psi) |
| Power Supply | 95-132 VAC / 190-264 VAC; 47-64 Hz; 600 VA |
| Noise Level | < 75 db (A) |
| Dimensions (L x W x H) | 660 x 580 x 400 mm (25.9 x 22.8 x 15.7“) |
| Weight Approximately | 59 kg (130 lbs) |
| CE-Conformity | The CompactStrip 9200 fully complies with all CE and EMC equipment guidelines
relative to mechanical and electrical safety and electromagnetic compatibility. |
| Important Note | Schleuniger recommends that wire samples be submitted in cases where there is
doubt as to processing capabilities of a particular machine. |