Categories

MINIC II

Archive
MINIC II
Compacting Station (Ultrasonic Welding) The Schunk MINIC II ultrasonic welding station can be used on the CrimpCenter series of fully automatic crimping machines for compacting (e.g. tip welding) of stripped wire ends from 0.22 – 6 mm2. The system includes the MINIC II station with swinging system (sonotrode) and a separate control unit with high frequency generator. The system also includes a PC,monitor, keyboard and mouse.

The CrimpCenter swivel arm positions the stripped wire end into the ultrasonic welding tool of the MINIC II station. Continuously adjustable servo drives close the tool according to programmed welding parameters. The sonotrode applies the mechanical vibration to the parts to be welded. The entire welding process is monitored and analyzed in realtime. User-friendly, multi-lingual menu structures, supported by graphical displays, provide for easy programming directly at the control unit.

Special Features

  • Reliable compacting (tip welding) of stripped wire ends (e.g. CU or Al) with proven Schunk ultrasonic welding technology
  • Possible to weld connections of copper and aluminium
  • Integrated good / bad sorting
  • Short cycle times, low heat exposure of wire strands during compacting
  • Programmable for different wire cross sections with processing parameters for each wire stored in PC for easy recall
  • Low-wear Sonotrode with 2 changeable connecting plates (reworkable)
  • Quality assurance with automatic recording of key quality measurements (e.g. precompacting / compacting specifications, welding time and welding energy)

Machine Configurations

Possible machine configurations and combination with crimping, sealing or other processes depend on the number of available stations of the CrimpCenter model.

Machine Compacting one or both wire ends (*single sided only)
CrimpCenter 61* Yes
CrimpCenter 62 Yes
CrimpCenter 63 Yes
CrimpCenter 64 Yes
CrimpCenter 64 HD Yes
CrimpCenter 65 Yes
CrimpCenter 66 Yes

Scope of Supply

  • MINIC II Compacting station mounted on height-adjustable base frame
  • High frequency generator 20 KHz (for Cu and Al materials)
  • Ultrasonic compacting tool including servo drives and pneumatics
  • PC-controller with process monitoring function, job memory, monitor, keyboard and mouse, connection cables

Optional

  • Barcode reader to recall saved data sets
  • Input voltage 3 x 220 V, PE, 50/60 Hz
  • Transformer for special input voltages
  • Uninterruptible power supply (USV)
  • Separate table for control unit, monitor and keyboard

Technical Data

Attribute Value
Wire Cross Section 0.22 – 6 mm2 (23 AWG – 10 AWG); other cross sections on request

Compacting Length

4 – 20 mm; other lengths on request

Electric Supply

3 L/N/PE AC 400V (+/- 10%), 50/60 Hz, 16 A

Compressed Air

min. 6.5 bar, dry, filtered and oil-free

Dimensions (L × W × H)

Compacting Station MINIC II: 560 x 230 x 365 mm
Control unit (w/o monitor and keyboard): 640 x 450 x 195 mm

Weight

approx. 26 kg (plus separate control unit ca. 25 kg)

CE – Compatibility

The MINIC II fully complies with all CE and EMC equipment guidelines relative to
mechanical and electrical safety and electromagnetic compatibility.

Important note

Schleuniger strongly recommends wire sampling for qualified testing of the compacting process. Please provide wire material for sampling.

New products