Categories

PowerStrip 9500 MX

Archive
PowerStrip 9500 MX
Automatic Cut & Strip Machine with Rotary Unit for Micro Coaxial Cable The PowerStrip 9500 MX programmable cut & strip machine processes micro-coaxial cables with center conductors as small as 38 AWG and most wire and cable types up to 3.5 mm (0.14”) O.D.. In addition to micro-coaxial cables, the PS9500 MX can also process extremely fine single conductor wires.
Due to the universal rotary stripping head and V-type cutting blades, the PowerStrip 9500 MX is able to process the entire range of cable types and diameters without any blade changes. Once the values for a particular cable and job are stored in memory, they can be retrieved in seconds.

Function

After pressing the “Start” key, the cable being processed is centered and clamped by the force-controlled centering system. The blades then execute the rotary incisions according to the programmed diameter and length position values. As soon as all the required incisions are completed, the cable is transported to the cutter head where it is cut and the various layers are stripped from both cable ends. After the cable is done being processed, it is transported to the machine exit and released by means of transport belts.

Processing Parameters / Cable Stripping Samples

  • Rotary speed
  • Incision diameter
  • Incision feed rate
  • Blade incision pause
  • Blade way back
  • Stripping length
  • Pull off length
  • Pull off speed
  • Discard function / Trimming function
  • Multiple step / Multiple strip / Processing order
ps9500mx-01

Technical Specifications

Attribute Value
Max. Cable Outer Diameter 3.5mm (0.14”)

Min. Conductor Diameter

0.12mm (0.005”) / AWG 38

Diameter Increments

0.01mm (0.001”)

Cable Length

Standard mode : 52mm (2.05”) – 1000m (39,370”) / Short mode < 52mm (2.05”)

Max. Stripping Length

Left side 40mm (1.57”) / Right side 999.9mm (39.37”)

Max. Pull Off Length

Left side 40mm (1.57”) / Right side 40mm (1.57”)

Length Increments

0.1mm (0.01”)

Transport Speed

Up to 1.95m/s (6.4 ft/sec)

Production Rate

Approx. 500 cables/hr (3 step strip on both ends)

Interfaces 

Wire markers, prefeeders, wire stackers, cable coilers, robotic interface, RS 232,
CAN, parallel (Centronics) printer port

Air Pressure

5 – 7 bar (75 – 90 psi)

Power Supply

95-132 VAC / 190-264 VAC; 47-64 Hz; 600 VA

Noise Level

< 75 db (A)

Dimensions (L x W x H)

660 x 580 x 390 mm (25.9 x 22.8 x 15.3”)

Weight

Ca. 80 kg (154 lbs)

CE-Conformity

The PowerStrip 9500 MX fully complies with all CE and EMC equipment guidelines
relative to mechanical and electrical safety and electromagnetic compatibility.

Important Note

Schleuniger recommends that wire samples be submitted in cases where there is
doubt as to the processing capabilities of a particular machine.

New products