SLP 2000 C
Crimping Station for CrimpCenter Series The SLP 2000 C is a crimping station for all models of the CrimpCenter series. It accepts most 40mm stroke mini-style crimp applicators with side- or rear-feed. Designed to facilitate high-speed crimping with both mechanical and pneumatic crimp applicators, the SLP 2000 C is perfectly suited for fully automatic processing of wires up to 6 mm2.
The SLP 2000 C features integrated crimp force monitoring and can be programmed directly in the CrimpCenter operating software EASY. Measured crimp force data is compared to defined tolerances and faulty crimps are automatically destroyed (good / bad sorting) with the cutting head of the CrimpCenter machine. The electronically controlled motor is extremely quiet and can be set to different cycle speeds depending on the application. Forward / reverse jog controls are also standard.
Split cycle functionality including an additional centering device for processing closed barrel terminals is optionally available.
Maximize Your Productivity
For short applicator change-over times, the SLP 2000 C features a quick-change applicator clamping plate. To further minimize machine downtime of your Crimp- Center, the SLP 2000 C can be optionally equipped with a Plug & CrimpTM adapter to allow complete change-over in less than 30 seconds with Schleuniger’s innovative ToolingShuttle 60. With the ToolingShuttle System (TSS), applicator, terminal reel
and paper winder can be prepared, while the CrimpCenter is producing – minimizing machine downtime significantly when frequently changing applications.
Options
- Height adjustable base frame (required for use on CrimpCenter models)
- Plug & CrimpTM adapter for ToolingShuttle 60
- Split Cycle functionality including centering device for closed barrel terminals
- 30 mm press stroke
- Various adapters for non-standard crimp applicators (incl. other shut heights)
- Work light
- Carrier strip cutter
- Guide for rear-feed terminal carrier strip types
- Accessory kit for pneumatic crimp applicators
- SAW maintenance unit (pneumatic filter for smallest particles)
Technical Specifications
Attribute | Value |
Crimping Force | 20 kN |
Wire Cross Section | up to 6 mm2 (AWG 10) |
Stroke | 40 mm (optional 30 mm) |
Shut Height | 135.78 mm at 40 mm stroke (other shut heights optionally available) |
Crimp Force Monitoring | integrated |
Crimp Height Adjustment | at crimp applicator |
Repeat Accuracy | < +/- 0.01 mm |
Cycle Time | 7 cycle speeds |
Power Supply | 1L / N / PE AC 230 or 1L / N / PE AC 110; 50-60 Hz; 0.75 kW |
Dimensions (W x H x L) | 260 x 780 x 380 mm (without base frame) |
Weight | approx. 90 kg (without base frame) |
CE-Conformity | The SLP 2000 C fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
Important Note | Schleuniger recommends that wire samples be submitted in case where there is doubt as to the processing capabilities of a particular machine. |