Categories

Uni-A Applicator

Archive
Uni-A Applicator
Universal Crimp Applicator The universal Uni-A applicators are designed for use with side and end feed, banded terminals with either open or closed barrel construction. The innovative, uni-body design results in better tooling alignment, fewer parts, simpler adjustments, a significant reduction in weight and better price. Handling and set up has never been easier. The Uni-A is suitable for use on automatic wire processing systems as well as on bench-top presses for terminals with either metal, plastic or Mylar tape carrier strips.

Function

Uni-A applicators are suitable for the following types of contact carrier strip positions:
Side feed: front-banded, middle-banded, rear-banded, double-banded
End feed: side-banded, longitudinal feed

Uni-A mechanicalUni-A mechanical
Uni-A pneumaticUni-A pneumatic
Uni-A FA pneumaticUni-A FA pneumatic
Uni-A MB pneumaticUni-A MB pneumatic

Special Features

  • Simple operation and robust design
  • The forward-stroke and bellmouth adjustments can easily be made while the applicator is mounted in the press
  • Less wear due to the high precision feeding system
  • A mechanical terminal ejector guarantees terminals will be cleared from the tooling after the crimp
  • Almost unlimited range of application
  • Can be used in CST Machines, Stripper-Crimpers and Crimp presses
  • For 30 or 40 mm strokes usable

Options

  • Floating wire stop
  • Quality control photo
  • Chrome plated crimp dies
  • 7-digit counter
  • Auxiliary pneumatic feed valve
  • Control sensor for pneumatic feed

Technical Specifications

Attribute
Feed type

mechanical/pneumatic

Stroke

40 or 30 mm (other strokes available on request)
Wire range 0.08 – 6 mm2 (AWG 28 – 10)
Crimp height adjustment Max. Adjustment
Increment
1 mm
0.02 mm
Insulation-crimp height
adjustment
Max. Adjustment
Increment
2 mm
0.1 mm
Feed Min.
Max.
Pitch
1 mm
30 mm (from 25 mm pneumatic feed recommended)
step-less
Brake pressure adjustable
Dimensions (B x W x L) Uni-A side feed
Uni-A end feed
Uni-A FA / Uni-A MB
150 x 120 x 175 mm (5.90“ x 4.72“ x 6.88“)
75 x 190 x 175 mm (2.95“ x 7.48“ x 6.88“)
190 x 120 x 175 mm (7.48“ x 4.72“ x 6.88“)
Weight 2.7 kg – 3.5 kg (5.95 lbs. – 7.71 lbs.)
Type of base plate 3 point quick change system
CE-Conformity The Uni-A fully complies with all CE and EMV equipment guidelines relative to mechanical
and electrical safety and electromagnetic compatibility.
Important Note Schleuniger recommends that wire samples be submitted in cases where there is
doubt as to the processing capabilities of a particular applicator.
New products