Uni-G Applicator
Universal Crimp Applicator Uni-G applicators are designed for use with side and end feed, banded terminals with either open or closed barrel construction. Handling and set up has never been easier. The Uni-G is suitable for use on automatic wire processing systems as well as on bench-top presses for terminals with either metal, plastic or Mylar tape carrier strips. Terminals are fed pneumatically.
Application Range
Uni-G applicators are designed for use with side and end feed, banded terminals with either open or closed barrel construction. Handling and set up has never been easier. The Uni-G is suitable for use on automatic wire processing systems as well as on bench-top presses for terminals with either metal, plastic or Mylar tape carrier strips. Terminals are fed pneumatically.
Function
Uni-G applicators are suitable for the following types of contact carrier strip positions:
Side feed: front-banded, middle-banded, rear-banded, double-banded
Back feed: side-banded, longitudinal feed
Special Features
- Simple operation and robust design
- The forward-stroke and bellmouth adjustments can easily be made while the applicator is mounted in the press
- Less wear due to the high precision feeding system
- Almost unlimited range of application
- Can be used in automatic and bench-top machines and many stripper- crimpers
Options
- Terminal lubricating device
- Active terminal ejector
- Wire insertion assist (open barrel terminals)
- Conductor strand positioner
- 7-digit counter
Technical Specifications
Attribute |
| |
Feed type |
| Pneumatic |
Stroke | | 38 - 44 mm (1.50 - 1.73”) (other strokes available on request) |
Wire range | | 0.08 – 6 mm2 (28 – 10 AWG) |
Crimp height adjustment | Max. Adjustment Increment
| 1,6 mm (0.063”) 0.02 mm (0.0008”) |
Terminal pitch and length | Side feed End feed
| Max. pitch: 37 mm (1.46”), Max. length: 54 mm (2.13”) Max. pitch: 38 mm (1.50”) |
Insulation-crimp height adjustment | Max. Adjustment Increment | 1,8 mm (0.071”) 0.03 mm (0.001”) |
Feed | Min. Max. Pitch | 1 mm (0.04”) 37 mm (1.46”) Continuous |
Brake pressure |
| Adjustable |
Air pressure | | 6 – 8 bar |
Dimensions (B x W x L) | Uni-G side feed Uni-G end feed | 180 x 160 x 100 mm (7.08" x 6.3" x 3.93") 90 x 190 x 160 mm (3.54" x 7.48" x 6.29") |
Weight | | 4 kg (8.81 lbs.) |
Type of base plate | | 3 point quick change system |
CE-Conformity | The Uni-G fully complies with all CE and EMV equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
Important Note | Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular applicator. |