Categories

UniCrimp 2500 B

Archive
UniCrimp 2500 B
Crimping machine With 25 tons of compression force, the UniCrimp 2500 B is ideal for special uses. For example hexagonal forming of metal tube terminal ends is possible for cables with a nominal cross-section up to 50 mm2 (AWG 0). With the appropriate accessories, banded terminals can also be processed the UniCrimp 2500 B can be used as a bench-top machine for semi-automatic processing. The UniCrimp 2500 B is userfriendly and can be equipped with a crimp force monitoring option.

Function

The crimping process is triggered by a two-handed trigger mechanism or by a foot pedal. For ease of set-up, the UniCrimp 2500 B is equipped with a creep mode. This enables the drive mechanism to be moved backwards and forwards slowly, to facilitate visual checking.

Special Features

  • Crank-/knee lever drive
  • Is prepared for adapter set for different crimp applicators
  • Creep mode

Options

  • Protection cover for crimp applicators
  • Protection cover safety plate for 10 mm and 16 mm (0.39” / 0.62”) O.D.
  • Terminal reel bracket for side feed applicators clockwise / counter-clockwise
  • Terminal reel bracket for rear feed applicators
  • Crimp Force Monitoring
  • Adapter set for standard crimp applicators with shut height 135.38 mm (5.34”) (FlexoCrimper / Uni-A)
  • Adapter set for HeavyCrimper PS / PR, shut height 158.38 mm (6.23”)
  • Shut height for 2 columned crimper 182.98 (7.20”), HeavyCrimper XL
  • Installation kit for pneumatic crimp applicators
  • Air service unit
  • Two-handed trigger mechanism / Foot pedal
  • Table board
  • Flange plate (1 set)
  • Waste container
  • Ring bolt M16 (for transportation with a lifting jack)
  • Transport cases for air-/ sea- / truck-packing

Technical Specifications

Attribute Value
Force 245 kN

Power

1.1 kW

Cross Section Range

Up to 50 mm2 (AWG 0)

Stroke

50 mm (1.96”), modified to 44 mm (1.73”) or 40 mm (1.57”) upon request

Shut Height

Depending of the integrated adapter set

Cycle Time

2.2 s

Press Activation

Two-handed trigger mechanism or foot pedal

Noise Level

85 dB

Power

115 – 230 VAC

Capacity

50/60 Hz

Dimensions (L x W x H)

390 x 550 x 1’290 mm, 15.35” x 21.65” x 50.78” (without terminal reel bracket / desktop)

Weight

208 kg (458 lbs.)

CE -Conformity


The UniCrimp 2500 B fully complies with all CE and EMC equipment guidelines relative
to mechanical and electrical safety and electromagnetic compatibility.

Important Note

Schleuniger recommends that wire samples be submitted in case where there is
doubt as to the processing capabilities of a particular machine.


New products