UniCrimp 500 A
Crimping Station for CrimpCenter With 5 tons of crimping force, the UniCrimp 500 A processes wire cross-sections up to 16 mm2 (5 AWG). With the proper crimp applicator, this machine can be integrated on the CrimpCenter 64 HD automatic cut, strip, and terminate machine. Both side- or rear feed banded terminals can be used. The UniCrimp 500 A is user-friendly and can be equipped with a crimp force monitoring option.
Function
The crimping process is triggered by the CrimpCenter. For ease of set-up, the UniCrimp 500 A is equipped with a creep mode. This enables the drive mechanism to be moved backwards and forwards slowly, to facilitate visual checking.
Special Features
- Combined crank / knee lever drive
- Quick-change applicator base plate
- Creep mode
- Adapter set for HeavyCrimper, shut height 158.38 mm (6.23”)
Options
- Adapter set FlexoCrimper, shut height 135.78 mm (5.34”)
- Crimp Force Monitoring
- Pneumatic accessories kit
- Air service unit
- Ring bolt M16 (for transportation with a lifting jack)
- Transport cases for air- / sea- / truck-packing
Technical Specifications
Attribute | Value |
Force | 49 kN |
Power | 1.1 kW |
Cross Section Range | Up to 16 mm2 (5 AWG) |
Stroke | 40 mm (1.57”) |
Shut Height | Standard: 158.38 (6.23“), Optional: 135.78 (5.34“) |
Cycle Time | 1 s |
Press Activation | Starting signal from CrimpCenter |
Noise Level | 85 dB |
Power | 115 – 230 VAC |
Capacity | 50/60 Hz |
Dimensions (L x W x H) | 390 x 550 x 1.290 mm, (15.35” x 21.65” x 50.78” ) without base frame |
Weight | 197 kg (434 lbs.) |
CE -Conformity | The UniCrimp 500 A fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
Important Note | Schleuniger recommends that wire samples be submitted in case where there is doubt as to the processing capabilities of a particular machine. |