UniCrimp LPC B
Crimping machine for loose piece terminals The UniCrimp LPC B is a benchtop station for processing loose piece terminals (closed barrel) in a cross section range from 0.14 – 4 mm2 (AWG 26 – 12). Terminals are automatically positioned for crimping. The operator manually inserts the prestripped wire and the UniCrimp LPC B crimps the wire end with an 8-point crimp. Modular change-over kits reduce machine downtime to a minimum and allow flexible processing of different terminal sizes and geometries (male / female).
Feeding and Positioning
A combined drum / track system feeds, sorts and separates the loose piece terminals. The integrated feeding module positions the terminal in the crimp applicator. Depending on the terminal feeding type, the UniCrimp LPC B is available in 3 versions.
Your Benefits
- Compact and open design
- Complete change-over to other terminals of same feeding type in < 5 minutes
- Simple machine operation
- Crimp applicator PrismaCrimper, optional Daniels WA27 or WA22
- Crimp depth step-less adjustable with PrismaCrimper
- Process monitoring for terminal presence and position during feeding
Technical Data
Attribute | Value |
Wire cross section | 0.14 – 4 mm2 (AWG 26 – 12) |
Inner conductor diameter | max. 3 mm |
Cable outer diameter (O.D.) | max. 7 mm |
Cycle time | < 1.5 s (for terminal positioning, crimping) |
Crimp type | 4 pin – 8-point crimp according to MIL spec 22520/1 |
Terminal diameter (O.D.) | max. 6 mm (outer diameter) |
Start cycle | foot pedal |
Power supply | 115 – 230 V, 50/60 Hz, max. 0.3 kW |
Pneumatic connection | min. 6 bar, oil-free, dry and filtered compressed air |
Dimensions (W x D x H) | 180 x 400 x 450 mm |
Weight | 33 kg |
CE-conformity | The UniCrimp LPC B fully complies with all CE and EMV equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
Important notice | Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. |