Categories

WireStacker 500 / 1000

Archive
WireStacker 500 / 1000
Passive Stacking Machines The WireStacker 500 and WireStacker 1000 are passive wire stacking systems witch guide and collect wires that have been processed with the Schleuniger EcoStrip 9300, OmniStrip 9400, PowerStrip 9500 and the MegaStrip 9600.

Function

The wire is fed through the ejector pipe of the wire stacker by the machine’s transport rollers. After processing each wire, the machine sends a control signal to the wire stacker making it drop the wire from the collection tube into the collection tray. Both stackers can handle wires as small as 0.75 mm2 (22 AWG).

Special Features

  • Low cost solution allowing unattended operation
  • WireStacker 500 /1000 stack wire up to a length of 1.5 m (5 ft.) / 3.0 m (10 ft.)
  • Greatly reduces labour involved in handling long wires
  • Passive design built for almost unlimited and trouble free cycles
  • Feed through design for handling lengths longer than 1.5 m / 3.0 m (5 / 10 ft.)
  • Uses dedicated wire stacker interface on the EcoStrip 9300, OmniStrip 9400, PowerStrip 9500 and MegaStrip 9600
  • Extruded aluminium frame and all stainless steel construction
  • Works equally well with short or long wires

Technical Specifications

Attribute Value
Cable Size Min.: 0.75 mm2 (22 AWG) (depending upon nature and structure of cable to be processed) Max.: 25.4 mm (1”) outer diameter

Range of Wire Lengths

Up to 1'500 / 3000 mm (60 “ / 120”). Longer lengths possible but cable depending.

Height of Wire Axis

Adjustable: 610 mm (24”) up to 1'060 mm (42”)

Control Signal
Requirements

24 VDC timed control signal (the WireStacker 500 / 1000 is activated by an electric
control signal from the EcoStrip 9300, OmniStrip 9400, PowerStrip 9500 or the
MegaStrip 9600).

Air Pressure

70 – 90 PSI (WireStacker 500 / 1000 includes air pressure regulator / gauge)

Air Consumption

<0.03 m3 / min. at 550 kPa (<1 CFM at 80 PSI)

Dimensions

WireStacker 500: 1'500 x 470 x 1'170 mm (60 x 18.5 x 46”)
WireStacker 1000: 3'000 x 470 x 1'170 mm (120 x 18.5 x 46”)

Weight

35 kg (75 Ibs.) / 55 kg (117 Ibs)

CE – Conformity

The WireStacker 500 and WireStacker 1000 fully comply with all CE and EMC
equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

Important Note

Schleuniger recommends that wire samples be submitted in cases where there is
doubt as to the processing capabilities of a particular machine.

New products