Uni-S Applicators
Designed for use with side- and end-feed, banded terminals of open or closed barrel construction.
Overview
The Uni-S is the latest generation crimp applicators for use in both automatic and semi-automatic benchtop crimping machines. Banded terminals of open or closed barrel construction with either metal or plastic carriers can easily be processed.
- Economically priced applicators to handle practically all terminal and feed types
- Rugged construction and simple set up to ensure long life and high quality results
- Includes convenient micro-adjust dials, a 6-digit counter and one additional set of tooling
- For use on automatic terminating machines as well as benchtop crimping presses
Application Range
The Uni-S family of applicators are designed for use with side- and end-feed, banded terminals of open or closed barrel construction. Handling and set up is as easy as ever. The Uni-S is suitable for use on automatic wire processing systems as well as on benchtop presses for terminals with either metal, plastic or Mylar tape carrier strips.
- Open barrel terminals on metal carrier strips, with or without weather seals
- Pre-insulated terminals on plastic or Mylar tape carrier strips
- Front, middle or center carrier strips
- Insulated end ferrules in strip form
- Open barrel end ferrules (clips) in strip form
- Wire splice terminals
More Information
Features
- Economically priced applicators to handle practically all terminal and feed types
- Rugged construction and simple set up to ensure long life and high quality results
- Includes convenient micro-adjust dials, a 6-digit counter and one additional set of tooling
- For use on automatic terminating machines as well as benchtop crimping presses
Models
- Mechanical side- and end-feed
- Pneumatic side- and end-feed
- Pneumatic side-feed for insulated end ferrules
- Pneumatic side-feed for Mylar tape
- Mechanical end-feed for splice terminal
Options
- Additional tooling sets
- Cross sectional images
- Capability studies on crimp height and pull test
- Integrated wire funnels (for closed barrel terminals)
Technical Data
| |
Feed Type | Mechanical or pneumatic |
Stroke | 40 and 30 mm (1.57 or 1.18") (Other strokes available on request) |
Conductor Cross-Section | 0.08 – 6 mm2(28 – 10 AWG) |
Terminal Pitch | Minimum: 1 00 (0.04")
Maximum: 30 mm (1.18”) (pneumatic feed recommended for 25 mm (1“) or more) |
Crimp Height Adjustment | Increment: 0.025 mm (0.001”)
Maximum: 1.5 mm (0.06”) |
Compressed Air Connection | 6 – 8 bar (90 – 110 psi) (pneumatic applicators only) |
Weight | 5 kg (11 lbs.) |
Important Note | Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. |